TR-DM04 Automatic Double-head Wire Stripping Cutting Wear Number Tube Type Terminal Crimping Machine
- Model
- TR-DM04
Item specifics
- Power
- AC220V/50HZ,
- Application
- Double-head Terminal Machine
- Feature
- Stable Performance
- Warranty
- 1year
- Control
- Servo and Step motor
- Contact
- Lily 0086-13715588365
- Function
- Wire Stripping Cutting Wear Number Tube terminal
Review
Description
TR-DM04 Automatic Double-head Wire Stripping Cutting Wear Number Tube Type Terminal Crimping Machine
Program brief:
Cutting and stripping the wires, crimping at both ends, printing the number tube, threading the number tube, and baking the number tube
Function introduction:
Wire cutting, single-end stripping, both-end stripping, both-end crimping, double-end crimping and baking number tube
EQUIPMENT NAME | AUTOMATIC DOUBLE-HEAD THREADING NUMBER TUBE TUBE TERMINAL MACHINE |
STRIP LENGTH | Front0.5~80mm Rear 0.1~10.0mm |
EQUIPMENT SIZE | W*800D1800*H1800mm |
|
WORK EFFICIENCY
|
Wire length 80-150mm approx.950pcs/hour, specialwire
|
EQUIPMENT WEIGHT | About 800KG |
PROCESSING OF WIRES | #22~#14AWG |
OPERATING VOLTAGE | SinglePhaseAC200V~242V50/60Hz10A |
CUTTING ACCURACY | Line length below 100mm Error 0.2+(line length x 0.002), Line length above 100mmTolerance 0.5+(line length x 0002) |
PROCESSING LENGTH | Leave rubber in the center 66mm~99999mm |
DEPTH OF CUT | Maximum adjustment 5.50mm, resolution 0.01mm |
SENSOR | Low air pressure, presence or absence of wires, abnormal pressure, abnormal entry wires |
COMPRESSED AIR | 0.5 MPa(5 kgf / cm2) clean dry gas |
PRODUCT FEATURES | 1.Cutting and stripping, 2.Pressing the end, 3.Cutting off the wire4.Threading and baking,5.Printing the number tube |
