TR-DM05 Double-head bulk Cold-pressed Number Tube Terminal Crimping Machine
- Model
- TR-DM05
Item specifics
- Power
- AC220V/50HZ,
- Application
- Double-head Terminal Machine
- Feature
- Stable Performance
- Warranty
- 1year
- Control
- Servo and Step motor
- Contact
- Lily 0086-13715588365
Review
Description
TR-DM05 Double-head bulk Cold-pressed Number Tube Terminal Crimping Machine
Double-headed bulk tube terminal double-threading number tube terminal machine (with twisted laser coding)
Brief description of the plan:
cutting and stripping the wires and crimping at both ends, printing the number tube (laser typing or thermal transfer printing is optional), inserting the number tube, and baking the number tube
Function introduction:
wire cutting, single-end stripping, two-end stripping, two-end crimping, double-end crimping and baking number tube
Processing wire: | #22~#14 AWG |
Processing capacity: | wire length 99-150mm about 500 pieces/hour, special wire about 400 pieces/hour. |
Cutting accuracy: | line length below 100mm error 0.2+ (line length x0.002) The line length is more than 100mm, the error is 0.5+ (line length x0.002) |
Processing length:
|
leave rubber in the middle 66mm~99999mm
|
Stripping length: | front end 0.5~8.0mm rear end 0.1~10.0mm |
Cutter depth: | maximum adjustment 5.50mm, resolution 0.01mm |
Detection device: | low air pressure, presence or absence of wires, abnormal crimping, abnormal wire entry |
Power supply: | Single phase AC200V~242V 50/60Hz 10A |
Compressed air: | 0.5 MPa(5kgf / cm2) clean dry gas |
Mechanical size: | W800 *D2100*H1800mm |
Mechanical weight: | about 800KG |