TR-BD3000 Semi-automatic straight stripping and Crimping terminal crimping machine

Stripping Length：  1.0mm-8.0mm

Cutting Error：         0.05mm-0.1mm

Positioning Error：   0.05mm-0.1mm

Applicable wire diameter：AWG16#~AWG24#(Dependson the wire)

Crimp Terminal：     Open Continuous Terminal, Straight

Applicable wire：     AV, AVS,AVSS, CAVUS, KV, KIV, UL, IV ferrite,fiber wire, etc.

1. The straight stripping and terminal stripping machine adopts advanced frequency conversion technology to precisely control the variable speed motor. It is equipped with a high-precision control module and transmission mechanism to complete the stripping and terminal stripping in one go; it has low noise and low power consumption. High-speed characteristics; effective for multi-core power cords.

2. The wire stripping action is driven by a cylinder, with fast action speed and accurate positioning; the waste material after stripping adopts vacuum suction method, which is clean, convenient and simple; the press is driven by a turbine reduction drive, and the pressure is highly accurate; this machine is suitable for operation by both raw and experienced hands. The machine can change the overall speed through the operation panel to adapt to the operator's proficiency.

3. The pneumatic parts all use Taiwan Airtac brand components, which are durable and accurate. They are suitable for various straight tape terminals, and the terminals and stripping positions are crimped to achieve uniformity.