TR-4F Turing Semi-auto Pneumatic Cable Stripping Machine

TR-4F Pneumatic Cable Stripping Machine

Suitable for electronic wires, multi-core wires, sheathed wires, rows of wires,double parallel wires and braided wires, and other wire processing industries

summary

1. This model is mainly for the current wire industry in some special wire stripping,such as computer core wire, isolation line, telephone line, row of fine wires, general Wire diameter AWG# 18-32, the diameter of 0.5mm above the special line can beused in this machine.

2.lmprove the traditional computer core wire stripping with a foot pedalhand-pulled way, evolved into the front clip backward way, not only to save physi-cal strength, but also to improve the efficiency of the best models.

3. The operation adopts the plane left and right to move to put the line way, shortenthe distance between the blade and the clamping seat, so that ordinary models cannot peel the special short line can be used in the machine, and no clip or burn thefingers of the worry.

4. There is a double knife design, peeling and cutting in one moulding, increase ordecrease the shims to set the length, accurate, rapid, blowing device can automati.cally remove the wire debris left after peeling.

Standard Accessories

1.Wrench 2.0mm,3.0mm,4.0mm,5.0mm each one,17mm one;

2.Gasket 0.5mm,1.0mm,1.5mm, 2.0mm thickness each a pair, a total of eightpieces (with a double knife model, another attached to a pair of slices)